When you turn on your air con on the initial hot day of the year it can be frustrating to locate that the unit is struggling to cool the room, or worse, no longer working at all. While it’s recommended you get a specialist engineer to perform an air conditioning service within your yearly property maintenance, there’s also a few simple checks that you can certainly do in between to keep your air-con running smoothly.
Keep your air con unit clean
Most air-con faults are due to lack of cleanliness, but just dusting the vents regularly could make a massive difference to the life span of one’s unit. ac installation st cloud fl Another simple thing you can certainly do to enhance the hygiene of one’s air con system is to get rid of the filters, spray them down with antibacterial spray and rinse with warm water. The cleaner you keep your unit, the less often you’ll must have an air conditioning service.
Change or clean the filter
The reason why your air con system includes a filter is both to safeguard the mechanics inside, in addition to keeping the air clean as part of your home or office. If this filter isn’t kept clean you’re making your air con system work harder and less efficiently, meaning your power bill will soon be higher and your yearly air-con service might not be sufficient to keep your unit in good health. Some air con filters have to be cleaned as opposed to replaced and vice versa. An electrostatic filter is cleaned, while a disposable fibreglass or paper filter ought to be replaced fairly regularly; ranging from once a month and twice a year, with respect to the quality of air in your area. Check it regularly to determine how often you ought to be changing yours. A filter which needs changing will look clogged with dust.
Make sure the condensing unit is not obstructed
The condensing unit is the part of one’s air con system that sits outside and pulls the air in. If this becomes obstructed by weeds, dead leaves as well as outdoor furniture you’ve stored against it, your air-con might not work in addition to it could do. Make cleaning the location around the system part of one’s regular property maintenance. It’s also good to get this done before an air conditioning service, in order to avoid being charged by the engineer for time spent cleaning, and also in order to avoid misdiagnosis of why your unit isn’t working properly.
Check airflow on inside and outside unit
Once you’ve removed any obstructions from the condensing unit, check that the airflow is powerful and consistent on both units. If the airflow is poor this can indicate that the air-con system includes a blocked coil or a declining fan. In most cases it will soon be necessary to call a specialist air con engineer to investigate the issue and supply a solution.
Switch between heating and cooling modes
It’s recommended to do a DIY air-con service when it has been a while since you’d used your air con system. One really easy thing you can certainly do is to try switching involving the cooling and heating modes. If your air-con is stuck using one setting, it normally indicates that there surely is a trouble with the reversing valve. If this happens you must call in a specialist engineer.
Repair any rust or corrosion
Check over your air con system, specially the outdoor unit, for any signs of rust or corrosion. If the damage is minimal, you can usually repair it by painting over it with waterproof steel paint. If the rust or corrosion is more severe you must call in a house maintenance professional. Ask your engineer to test for signs of oxidation while completing your air-con service.